The 5 Best Low Profile Floor Jacks for Your Garage [2020]

CountrySilo is reader-supported and all of our top picks are expert-approved. We may earn a commission, at no additional cost to you, on purchases made from our chosen links.

If you're in a tight squeeze to get your vehicle off the ground then adding any one of the best low profile floor jacks of 2020 to your garage tool arsenal is a must...

Top 5 Low Profile Floor Jacks

1. Pro-Lift F-767 2 Ton Low Profile Floor Jack

The Pro-Lift F-767 low profile floor jack has a two ton capacity and is ideal for gaining improved access to low ground clearance vehicles like sports cars.

It also boasts an impressive lifting range from 3.5 inches right up to 14 inches for greater flexibility of use.

This jack can fit easily under a clearance of just 3.5″ and it is easy to maneuver into place for greater user convenience.

Thanks to its robust heavy duty steel construction, this jack also has a very long lifespan and increased durability for extended workshop use.

This model also features a patented bypass device which guards against accidental over pumping while its in-built safety valve offers increased protection against overloads for better user safety.

It's ideal for use by the home mechanic and is protected by a 90 day manufacturer’s warranty.

Pros

  • Excellent safety protections against over pumping and overload
  • Heavy duty steel construction for durability and increased lifespan
  • Lifting range from 3 1/2″ to 14 Inches

Cons

  • Releases the vehicle quite quickly
  • Short handle means that pumping takes longer

2. Pittsburgh Automotive 3 Ton Heavy Duty Floor Jack

This low profile jack from Pittsburgh Automotive has a total lift capacity of 3 tons for greater versatility of use.

Allowing for easier placement under custom vehicles, this model also features extra wide casters which increase the jack’s stability while increasing its lifespan due to their strong steel construction.

This tool has been manufactured to industrial quality, making it suitable not only for domestic automotive enthusiasts for also for professional garage use.

With its Rapid Pump exclusive dual parallel pump system, it is able to lift even heavy vehicles with considerably fewer pumps and reduced user effort.

While the universal joint release ensures precise load control whatever the handle position.

The handle is in 2 pieces and is made from knurled steel for an extra sure grip while the foam bumpers ensure that no damage is incurred to the vehicle during use.

The construction is super tough precision welded and the finish is to an industrial grade, showing the high quality of this product.

This jack can lift vehicles up to around 2 feet from the ground while its low profile reaches under the majority of show cars.

Pros

  • Dual parallel pump system for reduced user effort
  • Extra wide steel casters for stability
  • Universal joint release for precise load control

Cons

  • Handle is hard and therefore can be painful to use for extended periods
  • Saddle is quite small

3. Powerzone 3 Ton Garage Jack

This garage jack from Powerzone has a 3 ton capacity and a lift range from 4″ right up to 18 1/4″.

Made from lightweight aluminum, this jack is easier to lift and maneuver and has even better portability, making it a good choice to keep inside a vehicle in case of on the road emergencies.

It heavy duty steel lift arm ensures increased durability and strength when its quick lifting hydraulic system saves the user time.

The integrated safety valve protects against accidental overloading to protect the user while the rubber padded saddle offers increased protection to the vehicle itself.

This jack features rear swivel wheels to allow for easier maneuvering and positioning even on rough surfaces.

The Powerzone floor jack also features a foam covered handle for more comfort for the user.

Pros

  • Foam covered handle for better user comfort
  • Rear swivel wheels for easier positioning and maneuvering on rough surfaces
  • Quick lifting hydraulic system to save time

Cons

  • Rubber pad wears through quickly
  • Handle is quite long when compared to some other models

4. Sunex 6602LP Lowrider Service Jack

With a minimum height of just 2.75″, this ultra-low service jack from Sunex is the perfect choice for all kinds of low riding height vehicles including exotic cars and sports cars.

Raising to a maximum height of 24 inches, this lift is versatile enough to be used on SUVs and pick up trucks too.

Thanks to the incorporated rapid rise technology, the dual pump pistons on this tool allow the user to quickly pump the vehicle to maximum height in just 6 1/2 pumps for reduced user fatigue.

Its 18 inch throw is long enough to reach all lift points beneath the vehicle.

The pump handle comes in two pieces for increased leverage, and this also makes the device easier to store in even the smallest of work spaces.

This high quality lowrider service jack holds a maximum weight capacity of 2 tons and is ideal for use in a domestic garage.

Pros

  • Ultra low height at just 2.75″ – ideal for use under sports cars and exotic vehicles
  • Dual pump pistons to reach maximum height in just 6.5 pumps for less user fatigue
  • 2 piece pump handle for convenient storage in small workshops

Cons

  • Heavier than many other models
  • Lift saddle is quite small

5. JEGS Professional Low-Profile Floor Jack

This low profile floor jack from JEGS Performance Products has been inspired by the lightweight pit jacks of the Sprint Cup.

Made from high quality aluminum for a lightweight yet robust construction, this device boasts a top notch finish and fit.

Its 26.5″ chassis has a width of 14″ and it features caster style wheels to the rear together with fixed wheels to the front for increased maneuverability and positioning during use.

Thanks to the tapered side plates, this jack has an incredibly low profile making it ideal for use under a wide range of sports cars and exotic vehicles.

This model also features a saddle that is padded by a rubber disc and this is rotatable through a full 360 degrees for extra flexibility.

The JEGS also features two side grip handles for even easier positioning as well as greater portability between jobs.

It takes just 5 to 6 full handle strokes to achieve full lift with this jack, ensuring reduced user fatigue, and the hydraulic valve is easily closed and opened by simply twisting the two piece handle (which can be removed for easier storage in small places).

The lower part of the handle features padded to avoid damage being incurred to the vehicle during use while the upper features a knurled grip to reduce the chance of accidental slippage.

Pros

  • High quality fit and finish
  • Lightweight aluminum construction for increased portability
  • Raises to full lifting height in just 5 to 6 strokes for less user fatigue

Cons

  • Can be tricky to assemble
  • Quite heavy when compared to other models

About THE AUTHOR

Andrew - Better Home DIY

Drew

Founder - CountrySilo

Growing up around the farmlands of the Midwest you learn at an early age getting your hands dirty is a way of life. Whether it was helping my Grandpa make cedar furniture, mowing neighborhood lawns or throwing bails of hay the do-it-yourself mentality runs strong in our family.

I am excited to help you tackle your projects and discover new ways to make your house a home!

Learn More About Us...

>
Scroll to Top