5 Best Tube Benders For Roll Cage [Top Picks for 2024]

CountrySilo is reader-supported and all of our top picks are expert-approved. We may earn a commission, at no additional cost to you, on purchases made from our chosen links.

If you are looking for the best tube bender for a roll cage we found the top five performing machines on the market today so that you can purchase the ideal one for your specific needs.

After you're done make sure to read our guide on how to bend roll bar tubing to ensure you project is top notch!

Top 5 Roll Cage Tube Benders

Affordable Bender AB105 Hydraulic Tube Bender
Happybuy Manual Pipe Tube Bender
RIDGID 38048 Heavy Duty Tubing Bender
Pittsburgh Tubing Roller Bender
KAKA Industrial HB-8 Hydraulic Roll Cage Tube Bender

1. Affordable Bender AB105 Hydraulic Tube Bender

If you are looking for an easy to use and intuitive tube bender for making your own roll cage, this machine is the perfect choice.

With its fully hydraulic operation thanks to an 8 ton bottle jack, this model comes complete with a die set included and additional die sets can be purchased separately to make this an even more versatile piece of machinery.

This tube bender can bend up to 90 degrees and is very affordable, making it a good choice for any mechanic on a budget.

The mandrel and die feature 1 inch shafts ensuring an extra long lifespan and incredible durability and the bends are clean and smooth in order to pass SCORE, NHRA and SCCA technical inspections.

As well as being suitable for building roll cages, this tube bender can be used for multiple purposes including creating boat railings or chopper frames and as an added bonus it is lightweight at under 50 pounds making it very portable.


  • Lightweight and portable
  • Smooth clean bends are produced that will pass relevant technical inspections
  • Fully hydraulic operation thanks to 8 ton bottle jack


  • Tube lock can be a bit tight
  • Some of the welds are not as strong as they could be

2. Happybuy Manual Pipe Tube Bender

This manual tube bender from Happybuy is ideal for mechanics on a budget.

With its longer handle, this machine cuts down on the labor of creating your roll cage and as it is easy to operate and simple to maintain it is a convenient addition to your workshop equipment.

This model features seven dies which can be used for the customization of brackets as well as for supporting other parts.

It can be used for a range of purposes including bending stainless steel, wire, metal and circle steel pipe as well as low pressure liquid jointing pipe measuring up to 25mm.

Thanks to the heavy duty steel frame it will enjoy a long useful lifespan and is durable and robust enough to withstand the rigors of the jobsite.

Its unique sliding mechanism makes it easy to place the formers into the correct tube diameter position and it can make different bends on solid round, square or flat stock making it an economical and quick way to make angled bends in all kinds of square or round tubing.

This bender is also lightweight make it very portable yet sturdy and it can be mounted to the floor or a work truck for extra convenience.


  • Lightweight and portable
  • Can be truck or floor mounted
  • Includes 7 dies


  • Does not come with a case

3. RIDGID 38048 Heavy Duty Tubing Bender

Designed to deliver a high quality bending performance on hard tubing such as titanium, steel and stainless steel, this tubing bender offers a two stage design which allows for bending between 90 and 180 degrees without the need to cross handles.

Its extra long handles increase the leverage reducing the force required to operate this machine while its inbuilt vise clamp ensures better stability during use.

Designed to tackle even the toughest of jobs, this heavy duty tube bender from Ridgid has a half inch outer diameter capacity and a 1.5″ bend radius and it can lock and unlock simply with a half rotation of the handle which was ergonomically designed for better performance and excellent user comfort.

Its cushioned grips ensure that minimal force is required while leverage is increased and user operation is improved.

The roll dies within the bending carriage reduce force while the clearly visible gain marks improve alignment.

This product is well protected by a lifetime warranty for the purchaser’s complete peace of mind.


  • Lifetime manufacturer’s warranty
  • Extra long handles to reduce force and increase leverage
  • Cushioned grips for better user comfort


  • Radius may be too large for tight spaces

4. Pittsburgh Tubing Roller Bender

This tubing roller bender is strong and sturdy enough to withstand the rigors of any mechanic’s workshop.

Designed specifically for the fabrication of automotive parts such as roll bars and exhaust pipes, this versatile and multifunctional piece of workshop equipment is able to handle tubing that measures between 3/4″ and up to 2 inches in diameter.

Its features include incremental bending which allows for more accurate and precise control over achieve the specific curve desired.

Whether you are a metal worker or an automotive specialist, this great value tubing bender is an ideal choice for your garage.


  • Handles tubing that measures between 3/4″ and up to 2″ in diameter
  • Features incremental bending for more accurate control over the curve
  • Strong and sturdy construction


  • No form of gauging on this unit
  • Stand must be bought separately

5. KAKA Industrial HB-8 Hydraulic Roll Cage Tube Bender

This industrial strength 8 ton hydraulic tube bender has been specifically designed for use in creating vehicle roll cages and is well suited to the task thanks to its solid steel frame which is incredibly robust and durable and its sturdy design.

With its 8 ton forming jack, it is extremely stable when in use and it guarantees high precision thanks to its steel forming dies and cast followers which will never defame or flatten the edges of the material.

This tube bender comes complete with five different dies – a 34″, a 1″, a 1.5″, a 1 58″ and a 1 3/4″ diameter for greatest flexibility of use.

Constructed from solid high quality materials, this model enjoys a long useful lifespan and it is also easy to operate thanks to its hydraulic design.

It can bend up to a maximum angle of 90 degrees while the different dies enable rapid changes while increasing its versatility of use.

This is an ideal piece of equipment for any home mechanic or automotive enthusiast who is keen to create their own roll cage in their home workshop.


  • Made from high quality solid steel materials for a long lifespan
  • Comes complete with five different sized dies
  • 8 ton forming jack for extra stability of use


  • Heavy and therefore not portable


Drew - CountrySilo


Co-Founder CountrySilo

Growing up around the farmlands of the Midwest you learn at an early age getting your hands dirty is a way of life. Whether it was helping my Grandpa make cedar furniture, mowing neighborhood lawns or throwing bails of hay the do-it-yourself mentality runs strong in our family.

I am excited to help you tackle your projects and discover new ways to make your house a home!

Learn More About Us...

Scroll to Top

Get tailored advice & exclusive content

Join our exclusive 2,500+ email list to get tailored advice, product roundups, and be the first to see our new content. No spam, we promise.